ASTM's plastics standards are instrumental in specifying, testing, and assessing the physical, mechanical, and chemical properties of a wide variety of materials and products that are made of plastic and its polymeric derivatives. During processing, these synthetic or semisynthetic organic solids have a very malleable characteristic that allows them to be molded into an assortment of shapes, making them very suitable for the manufacture of various industrial products. These plastic standards allow plastic manufacturers and end-users to examine and evaluate their material or product of concern to ensure quality and acceptability towards safe utilization.

Plastics Standards

ASTM's plastics standards are instrumental in specifying, testing, and assessing the physical, mechanical, and chemical properties of a wide variety of materials and products that are made of plastic and its polymeric derivatives. During processing, these synthetic or semisynthetic organic solids have a very malleable characteristic that allows them to be molded into an assortment of shapes, making them very suitable for the manufacture of various industrial products. These plastic standards allow plastic manufacturers and end-users to examine and evaluate their material or product of concern to ensure quality and acceptability towards safe utilization.

Jump to:

Analytical Methods

D3834-93 Test Method for Purity of Vinyl Chloride Monomer by Gas Chromatography (Withdrawn 1998)

D4509-96 Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles (Withdrawn 2005)

D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry

D7567-09 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction (Withdrawn 2015)

D8133-21 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry

D5226-21 Standard Practice for Dissolving Polymer Materials

D5507-21a Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography

D6042-09(2016) Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

D5508-16 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

D5227-21 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography

D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography

D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

D4754-18 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell

D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

D1601-18 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers

D5477-18 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

D6247-18 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

D3016-97(2018) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships

D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

D6953-18 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

D3749-19 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

D4443-19 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

D7132-19 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam

D6869-17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

D7993-15(2019) Standard Guide for Analyzing Complex Phthalates

D5017-17 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

D494-11(2019) Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

D1895-17 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

D5296-19 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique

D4218-20 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique

D7823-20 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry

D792-20 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique

D1603-20 Standard Test Method for Carbon Black Content in Olefin Plastics

D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique (Withdrawn 2020)

D3594-93(2013) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers (Withdrawn 2019)

D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers (Withdrawn 2015)

D4322-96(2001)e1 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography (Withdrawn 2010)

D5524-94(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography (Withdrawn 2009)

D5815-95(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) (Withdrawn 2009)

D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

D5594-18a Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

D7191-18 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography

D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS) (Withdrawn 2021)

D4526-20 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography

D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering

D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

D7210-21 Standard Practice for Extraction of Additives in Polyolefin Plastics

D2857-22 Standard Practice for Dilute Solution Viscosity of Polymers

D7083-16(2022) Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

D3591-22 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds

D2238-22 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1

D5630-22 Standard Test Method for Ash Content in Plastics

D4019-94a Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide (Withdrawn 2002)

D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

Cellular Materials - Plastics and Elastomers

D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

D2856-94(1998) Standard Test Method for Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer (withdrawn 2006)

D1622-20 Standard Test Method for Apparent Density of Rigid Cellular Plastics

D3770-91 Specification for Flexible Cellular Materials-High-Resilience Polyurethane Foam (HR) and Combustion Modified High Resilience (CMHR) Polyurethane Foam (Withdrawn 1998)

D4889-21 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

D4876-98 Standard Test Method for Polyurethane Raw Materials Determination of Acidity of Crude or Modified Isocyanates (Withdrawn 2004)

D5523-21 Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

D4669-18 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

D3576-20 Standard Test Method for Cell Size of Rigid Cellular Plastics

D3453-20 Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications

D2126-20 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

D1056-20 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

D4672-18 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

D4659-19 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates

D7997-21 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations

D4878-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

D5629-16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

D6226-21 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

D8036-16 Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI

D4819-13(2021)e1 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

D1621-16 Standard Test Method for Compressive Properties of Rigid Cellular Plastics

D4274-21 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

D4671-21 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols

D1786-21 Standard Specification for Toluene Diisocyanate

D3489-17 Standard Test Methods for Microcellular Urethane Materials

D3574-17 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

D1623-17 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

D4660-18 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate

D4273-18 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

D4875-18 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols

D4890-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

D6979-18 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

D6099-18 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

D4661-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates

D3748-14(2019) Standard Practice for Evaluating High-Density Rigid Cellular Plastics

D2842-19 Standard Test Method for Water Absorption of Rigid Cellular Plastics

D5155-19 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates

D7710-14 Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials (Withdrawn 2021)

D3575-20 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers

D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates

D1055-09 Standard Specifications for Flexible Cellular Materials-Latex Foam (Withdrawn 2014)

D1565-81(1990) Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Open-Cell Foam) (Withdrawn 1998)

D6576-20 Standard Specification for Flexible Cellular Rubber Chemically Blown

D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

D3769-20 Standard Test Method for Microcellular Urethanes—High-Temperature Sag

D4877-19 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates

D7487-18 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

D3851-17(2022) Standard Specification for Microcellular Polyurethane Shoe Soling Materials

D3768-22 Standard Test Method for Microcellular Urethanes—Flexural Recovery

D7253-22 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

D6437-22 Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)

D1667-22 Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)

D4670-17(2022)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols

D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

D7252-22 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

D5672/D5672M-22 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique

Durability of Plastics

D4459-21 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

D1499-13(2021) Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

D6360-15(2021) Standard Practice for Enclosed Carbon-Arc Exposures of Plastics

D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

D618-21 Standard Practice for Conditioning Plastics for Testing

D2565-16 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

D3045-18 Standard Practice for Heat Aging of Plastics Without Load

D1712-09(2020) Standard Practice for Resistance of Plastics to Sulfide Staining

D4674-19 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

D756-93 Practice for Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions (Withdrawn 1998)

D1435-20 Standard Practice for Outdoor Weathering of Plastics

D5272-08(2021) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics

D5071-06(2021) Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

D543-21 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

D4364-13(2022)e1 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight

D1042-22 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

D794-93 Practice for Determining Permanent Effect of Heat on Plastics (Withdrawn 1998)

D5208-14(2022) Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

D5870-22 Standard Practice for Calculating Property Retention Index of Plastics

D570-22 Standard Test Method for Water Absorption of Plastics

Environmentally Degradable Plastics and Biobased Products

D5209-92 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2004)

D5247-92 Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms (Withdrawn 2004)

D5988-18 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil

D6003-96 Standard Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment (Withdrawn 2005)

D6692-01 Standard Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater (Withdrawn 2010)

D7081-05 Standard Specification for Non-Floating Biodegradable Plastics in the Marine Environment (Withdrawn 2014)

D6852-02 Standard Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials and Products (Withdrawn 2011)

D7075-04 Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products (Withdrawn 2013)

D6868-21 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

D6776-02 Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment (Withdrawn 2011)

D7473/D7473M-21 Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open System Aquarium Incubations

D6691-17 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

D6954-18 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

D5526-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

D3826-18 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

D7475-20 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions

D5510-94(2001) Standard Practice for Heat Aging of Oxidatively Degradable Plastics (Withdrawn 2010)

D5210-92(2007) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2016)

D5951-96(2002) Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing (Withdrawn 2011)

D6002-96(2002)e1 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics (Withdrawn 2011)

D6340-98(2007) Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment (Withdrawn 2016)

D5271-02 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System (Withdrawn 2011)

D7026-13 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020)

D7444-18a Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics

D5338-15(2021) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures

D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

D7991-22 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy Marine Sediment under Controlled Laboratory Conditions

D5152-91 Practice for Water Extraction of Residual Solids from Degraded Plastics for Toxicity Testing (Withdrawn 1998)

D5512-96 Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor (Withdrawn 2002)

D5509-96 Standard Practice for Exposing Plastics to a Simulated Compost Environment (Withdrawn 2002)

D5525-94a Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment (Withdrawn 2002)

D6400-22 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

Executive

D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics

Film, Sheeting, and Molded Products

D3351-93 Standard Test Method for Gel Count of Plastic Film (Withdrawn 2000)

D8195-18 Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting

D3420-21 Standard Test Method for Pendulum Impact Resistance of Plastic Film

D2582-21 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

D2103-15 Standard Specification for Polyethylene Film and Sheeting

D4321-15 Standard Test Method for Package Yield of Plastic Film

D2684/D2684M-15 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products

D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop

D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles

D4635-16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications

D1004-21 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

D2659-16 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers

D3981-09a(2016) Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

D8065/D8065M-16 Standard Classification System and Basis for Specification for Specifying Plastic Films

D4204-16 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

D4801-08(2016) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater

D5047-17 Standard Specification for Polyethylene Terephthalate Film and Sheeting

D2561-17 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

D5946-17 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

D1998-21 Standard Specification for Polyethylene Upright Storage Tanks

D8136-17 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge

D2578-17 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

D5419-21 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

D7310-21 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors

D6287-17 Standard Practice for Cutting Film and Sheeting Test Specimens

D1894-14 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

D1922-15(2020) Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

D1938-19 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

D5748-95(2019) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film

D882-18 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

D7192-20 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors

D1204-14(2020) Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D2732-14(2020) Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting

D2923-13 Standard Test Method for Rigidity of Polyolefin Film and Sheeting (Withdrawn 2015)

D2741-95(2005) Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation (Withdrawn 2011)

D4225-03 Standard Specification for Styrene-Butadiene Sheeting (Withdrawn 2009)

D2838-18 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting

D6988-21 Standard Guide for Determination of Thickness of Plastic Film Test Specimens

D3354-21 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

D2673-14(2022) Standard Specification for Oriented Polypropylene Film

D1709-22 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

D1239-22a Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals

D1593-22 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

C1147-14(2022) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

Mechanical Properties

D673-93ae1 Test Method for Mar Resistance of Plastics (Withdrawn 1998)

D671-93 Standard Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force (Withdrawn 2002)

D1242-95a Standard Test Methods for Resistance of Plastic Materials to Abrasion (Withdrawn 2004)

D4065-20 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

D5024-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

D1044-19 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser

D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

D4440-15 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

D4473-08(2021) Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior

D5418-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

D695-15 Standard Test Method for Compressive Properties of Rigid Plastics

D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

D5420-21 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

D2990-17 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

D732-17 Standard Test Method for Shear Strength of Plastics by Punch Tool

D5279-21 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion

D5592-94(2018) Standard Guide for Material Properties Needed in Engineering Design Using Plastics

D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials

D256-10(2018) Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

D3763-18 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

D5024-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

D785-08(2015) Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

D5628-18 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D4508-10 Standard Test Method for Chip Impact Strength of Plastics (Withdrawn 2016)

D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022)

D7107-04(2010) Standard Test Method for Creep Measurement of Self-Lubricating Bushings (Withdrawn 2016)

D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending (Withdrawn 2009)

D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (Withdrawn 2019)

D6395-11 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics (Withdrawn 2019)

D4092-21 Standard Terminology for Plastics: Dynamic Mechanical Properties

D1822-21 Standard Test Method for Determining the Tensile-Impact Resistance of Plastics

D4812-19e1 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics

D7791-22 Standard Test Method for Uniaxial Fatigue Properties of Plastics

D638-22 Standard Test Method for Tensile Properties of Plastics

D5045-14(2022) Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

D3028-95 Standard Test Method for Kinetic Coefficient of Friction of Plastic Solids (Withdrawn 2000)

Optical Properties

D3015-95 Standard Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds (Withdrawn 2001)

D1003-21 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

D1746-15 Standard Test Method for Transparency of Plastic Sheeting

D6290-19 Standard Test Method for Color Determination of Plastic Pellets

D542-22 Standard Test Method for Index of Refraction of Transparent Organic Plastics

Plastic Building Products

D5140-95 Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004)

D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding

D3841-21 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

D7082-21 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

D6777-16 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding (Withdrawn 2021)

D7856-21 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

D3679-21 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

D7445-18 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

D4726-18 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

D4803-18 Standard Test Method for Predicting Heat Buildup in PVC Building Products

D6864-11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products (Withdrawn 2018)

D5206-19 Standard Test Method for Windload Resistance of Rigid Plastic Siding

D3678-19 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

D4099-95 Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999)

D7251-11 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products (Withdrawn 2018)

D4226-19e1 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

D5926-15(2020) Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

D4756-15(2021) Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

D7254-21 Standard Specification for Polypropylene (PP) Siding

D7793-21 Standard Specification for Insulated Vinyl Siding

D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

D4068-17(2022) Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

D4477-22 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

D4551-22 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

D5319-22 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

Plastic Lumber

D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)

D6435-99 Standard Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes (Withdrawn 2007)

D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement

PS106-01 Provisional Standard Specification for Rods and Tubes of Polyethylene (PE)

D7568-17 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications

D7258-17 Standard Specification for Polymeric Piles

D6112-18 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

D6117-18 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

D6109-19 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

D6108-19 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

D6662-22 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

Recycled Plastics

D5033-00 Standard Guide for Development of ASTM Standards Relating to Recycling and Use of Recycled Plastics (Withdrawn 2007)

D6288-17 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing

D7209-06 Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015)

D5991-17 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake

D6265-17 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test

D5814-18 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test

D1972-97(2005) Standard Practice for Generic Marking of Plastic Products (Withdrawn 2014)

D5577-19 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics

D7611/D7611M-21 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

Reinforced Thermosetting Plastics

D4357-96 Standard Specification for Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics (Withdrawn 2004)

D2563-08(2015) Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts

D2562-94(2015) Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics

D3846-08(2015) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

D7792/D7792M-15 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs

D7992/D7992M-15 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs

D4475-21 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

D3914-02(2016) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

D2734-16 Standard Test Methods for Void Content of Reinforced Plastics

D3647-16 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition (Withdrawn 2022)

D7029-17 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)

D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

D2343-17 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending

D3916-08(2016) Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins

D4385-19 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

D953-19 Standard Test Method for Pin-Bearing Strength of Plastics

D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets

D7745-19 Standard Practice for Testing Pultruded Composites

D3917-15a Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes

D3918-11 Standard Terminology Relating to Reinforced Plastic Pultruded Products (Withdrawn 2020)

D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Withdrawn 2022)

D4923-01 Standard Specification for Reinforced Thermosetting Plastic Poles (Withdrawn 2010)

D2291/D2291M-22 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites

Reinforced Thermosetting Resin Piping Systems and Chemical Equipment

D4167-21 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

D1694-95(2000) Standard Specification for Threads 60° (Stub) for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Withdrawn 2005)

D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells

D5365-18 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D3299-18 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

D2143-21 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

D2997-21 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D3982-21 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

D2310-06(2012) Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Withdrawn 2017)

D5421-15 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

D3840-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

D2925-14(2019) Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

D2105-01(2019) Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

D3754-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

C582-09(2016) Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

D2996-17 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D2924-12(2017) Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D2517-18 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

D4161-14(2019) Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

D3681-18 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

D5677-17 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

D5364-14(2019) Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units

D6041-18 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

D5685-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

D3839-14(2019) Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

C581-20 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

D3262-20 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

D4398-07 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure (Withdrawn 2015)

D4166-99(2004)e1 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument (Withdrwan 2008)

D3567-17(2022) Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

D6783-05a(2022) Standard Specification for Polymer Concrete Pipe

D4024-22 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

D5686-95 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines (Withdrawn 2002)

D2992-22 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

Specimen Preparation

D957-21 Standard Practice for Determining Surface Temperature of Molds for Plastics

D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

D955-21 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

D1896/D1896M-10(2017) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds

D3419-12(2019) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds

D5224-12(2019) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

D6289-13(2019) Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

D4703-16 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

Terminology

D4805-88(1994)e1 Standard Terminology for Plastics Standards (Withdrawn 2002)

D7711-11(2015) Standard Guide for Description of Polymer Pellet Defects

D1600-18 Standard Terminology for Abbreviated Terms Relating to Plastics

D883-22 Standard Terminology Relating to Plastics

Thermal Properties

D3417-99 Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)

D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials

D2863-19 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

D1790-21 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

D5930-17 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

D3123-09(2017) Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

D1238-20 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

D5422-17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

D1525-17e1 Standard Test Method for Vicat Softening Temperature of Plastics

D3895-19 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

D3364-99(2019) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

D3835-16 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics

D5132-20 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

D4804-20 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

D7309-21b Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

D3814-06 Standard Guide for Locating Combustion Test Methods for Polymeric Materials (Withdrawn 2012)

D746-20 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

D5025-20a Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

D2117-82(1988)e1 Standard Test Method for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method (Withdrawn 1994)

D621-64(1988)e1 Test Methods for Deformation of Plastics Under Load

D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

D731-22 Standard Test Method for Molding Index of Thermosetting Molding Powder

D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

D4205-93(1994)e1 Guide for For Flammability and Combustion Testing of Rubber and Rubber-Like Materials (Withdrawn 1997)

Thermoplastic Materials

D6713-21 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

D8366-21a Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF

D1693-21 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

D729-95 Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000)

D1249-92(1999) Standard Specification for Octyl Ortho-Phthalate Ester Plasticizers (Withdrawn 2007)

D1928-96 Standard Practice for Preparation of Compression-Molded Polyethylene Test Sheets and Test Specimens (Withdrawn 2001)

D2951-00 Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking (Withdrawn 2006)

D2873-94(1999)e1 Standard Test Method for Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry (Withdrawn 2003)

D706-20 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)

D4181-00 Standard Classification for Acetal (POM) Molding and Extrusion Materials (Withdrawn 2005)

D4507-93a Specification for Thermoplastic Polyester (TPES) Materials (Withdrawn 1999)

D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)

D4550-98 Standard Specification for Thermoplastic Elastomer-Ether-Ester (TEEE) (Withdrawn 2004)

D4000-20 Standard Classification System for Specifying Plastic Materials

D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)

D5318-97 Standard Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates (Withdrawn 2004)

D5046-98 Standard Specification for Fully Crosslinked Elastomeric Alloys (FCEAs) (Withdrawn 2000)

D3295-20 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

D5593-99e1 Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)

D5021-00 Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007)

D5676-99 Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004)

D5476-99 Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)

D6260-98 Standard Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA) (Withdrawn 2004)

D5393-97 Test Method for Determination of Fogging Characteristics of Vehicle Interior Trim Materials (Withdrawn 1998)

D7194-19 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)

D6867-19 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

D5740-18 Standard Guide for Writing Material Standards in the Classification Format

D2383-19 Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

D3367-21 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force

D6394-21a Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)

D1755-21 Standard Specification for Poly(Vinyl Chloride) Resins

D2176-16(2021) Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester

D2116-16(2021) Standard Specification for FEP Resin Molding and Extrusion Materials

D4549-15(2021) Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

D707-15 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)

D1824-16 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

D4673-16 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

D5138-16 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

D1823-16 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

D6150-16 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

D4802-16 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

D6779-21 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

D5998-16 Standard Specification for Molded Polyethylene Shipping and Storage Drums

D2765-16 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

D5205-16 Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials

D3350-21 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

D1248-16 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

D6865-17 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials

D5927-17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

D7436-17 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology

D5857-17 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

D6835-17 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

D7474-17 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

D6338-17 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods

D3307-21 Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials

D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

D3222-21 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

E1788-16 Standard Test Method for Acidity in Acrylonitrile (Withdrawn 2022)

D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

D6262-17 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

D5675-13(2018) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders

D4101-17e1 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials

D787-18 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

D7292-18 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

D5989-18 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

D5575-18 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

D8156-18 Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)

D7211-13(2018) Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

D3275-18 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

D2647-18 Standard Specification for Crosslinkable Ethylene Plastics

D4895-18 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

D6040-18 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D5492-17 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

D2222-19 Standard Test Method for Methanol Extract of Vinyl Chloride Resins

D3596-19 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins

D6339-11(2019) Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

D7471-19 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials

D7472-19 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials

D3595-14(2019)e1 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

D4745-19 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

D4894-19 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

D3012-19 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

D3296-14a(2019) Standard Specification for FEP-Fluorocarbon Tube

D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods

D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions

D4066-13(2019) Standard Classification System for Nylon Injection and Extrusion Materials (PA)

D6456-10(2018) Standard Specification for Finished Parts Made from Polyimide Resin

D2287-19 Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

D3030-17 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins

D6778-20 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D2839-16 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

D1710-15(2021) Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

D3369-01 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006)

D2151-95(2000) Standard Practice for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients (Withdrawn 2003)

D2288-97(2001) Standard Test Method for Weight Loss of Plasticizers on Heating (Withdrawn 2010)

D2581-09 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (Withdrawn 2018)

D3915-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Withdrawn 2015)

D1996-97(2003) Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (Withdrawn 2009)

D6457-08(2013) Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Withdrawn 2018)

D5203-07 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources (Withdrawn 2016)

E1863-18 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography

D4441-20 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

D5436-15(2020) Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

D7293-19 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

D4976-12a(2020) Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

D2538-18 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

D3892-15(2020) Standard Practice for Packaging/Packing of Plastics

D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material

D4067-21 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

D3368-17(2022) Standard Specification for FEP Sheet and Film

D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers

D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

D1430-22 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

D3159-22 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials

D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

D5491-08(2022) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

D3308-12(2022) Standard Specification for PTFE Resin Skived Tape

D6585-17(2022) Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D7193-17(2022) Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D3291-22 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression

D4216-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D1243-22 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

D6261-14(2022) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

D3294-22 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes

D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

D2115-22 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

D1203-22 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods

D1562-22 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)

D4396-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications

D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials

D5336-22 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials

D8349-21 Standard Classification System for and Basis of Specifications for Thermoplastic Joining Interface Materials for Creation of Joints Between Different Materials for the Production of End Items or Parts that are Intended to be Disassembled and/or Reassemb

D6314-98 Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials (Withdrawn 2002)

D5204-22 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials

D6263-22a Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

Thermosetting Materials

D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (Withdrawn 2008)

D5939-96 Standard Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials (Withdrawn 1998)

D5941-96 Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998)

D1763-00(2021) Standard Specification for Epoxy Resins

D3013-13(2021) Standard Specification for Epoxy Molding Compounds

D1636-21 Standard Specification for Allyl Molding Compounds

D4617-03 Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012)

D5948-05(2020) Standard Specification for Molding Compounds, Thermosetting

D704-99(2020) Standard Specification for Melamine-Formaldehyde Molding Compounds

D705-99(2020) Standard Specification for Urea-Formaldehyde Molding Compounds

D1201-13(2022)e1 Standard Specification for Thermosetting Polyester Molding Compounds

D2393-86 Test Method for Viscosity of Epoxy Resins and Related Components

D4350-16(2022) Standard Test Method for Corrosivity Index of Plastics and Fillers

Trenchless Plastic Pipeline Technology

F2831-19 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

F2719-09(2015) Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022)

F2718-09(2015) Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022)

F1735-21 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

F3182-16 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water

F3033-16(2021) Standard Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing an Inflatable Bladder for Resurfacing Manhole Walls of Various Shapes and Sizes

F1698-21 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

F1947-21a Standard Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits

F1697-18 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

D5813-04(2018) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

F2985-14(2019) Standard Practice for Installation of a PVC Segmental Panel Liner System in Man-Entry Size Sewers and Conduits

F2984-13(2019) Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits

F1606-19 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner

F3240-19e1 Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines

F2561-20 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner

F1871-20 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F3508-21a Standard Guide for In-Situ Pipeline Renovation As Dual-Wall Composite Pipeline by Push/Pull Installation of Compressed-Fit Shape-Memory-Polymer Tubular (SMPT)

F1504-21e1 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation

F1216-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

F3541-22 Standard Practice for Sectional Repair of Existing Gravity Flow, Non-Pressure Pipelines and Conduits by Pushed or Pulled-In-Place Installation of Cured-In-Place Thermosetting Resin Pipe (CIPP)

F3097-22 Standard Practice for Installation of an Outside Sewer Service Cleanout through a Minimally Invasive Small Bore Vacuum Excavation and Same Day Restoration

F2994-18(2022) Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems

F1741-22 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

F1743-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

F1867-22 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F2019-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method

F2599-22 Standard Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner

F1962-22 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings