Standard Active Last Updated: Jan 27, 2017
ASTM D5386-16

Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

Significance and Use

4.1 The primary objective of the visual method of Pt-Co color measurement, as defined in Test Method D8005, is to rate specific materials for yellowness. This yellowness is frequently the result of the undesirable tendency of liquid hydrocarbons to absorb blue light due to contamination in processing, storage or shipping.

4.2 Clear liquids can be rated for light absorbing yellowish or brownish contaminants using scales that simulate the long-established visual-comparison method.

Scope

1.1 This test method covers an instrumental method for the CIE (Commission International de l’Eclairage) tristimulus measurement of the color of near-clear liquid samples. The transmission measurement values are converted to the color scale in the platinum-cobalt (Pt-Co) system.

1.2 This test method has been found applicable to the color measurement of clear, liquid samples, free of haze, with nominal Pt-Co color values in the 0 to 100 range. It is applicable to non-fluorescent liquids with light absorption characteristics similar to those of the Pt-Co color standard solutions.

1.3 The tristimulus colorimetry may be calculated from spectral measurements or be obtained directly from a colorimeter. Practice E1455 provides some guidance on colorimeters, while Test Methods D1686 and D2108 deal with the visual and instrumental measurement of near-clear liquids.

1.4 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded in accordance with the rounding off methods of Practice E29.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 06.04
Developed by Subcommittee: D16.04
Pages: 4
DOI: 10.1520/D5386-16
ICS Code: 71.080.01